In our course design, there are three main calculation aspects: 1. You need to calculatethe output of garbage produced in a certain period of time, and then you need convert it into volume, and then the volume to be buried each year is designed according to the total volume, and the amount of landfill per day can be given according to the volume.2. Calculate the production of leachate according to the amount of landfill, and design the leachate treatment process according to the production, you can use the process flow of high concentration organic wastewater treatment to apply this design process. This part does not involve the design of specific leachate treatment system structures size.3. Gas production can be calculated according to the landfill volume, and the corresponding processing technology can be given according to the calculation results.During the calculation, except for the parameters given by me, all other parameters can be set according to the design specifications.If you submit a course design with the above content, your final grade will be calculated from 80. Let me emphasize again that the above three aspects of calculation are involved, and you can quote the formulas and parameters from the technical specifications, or from relevant books and literature, as long as they are marked at the end of the course design.
Specifically, our course design should include, but not be limited to the following main contents.1.Introduction. You can mainly discuss the disposal methods of municipal solid waste through the literature. Of course, the focus needs to be on landfill.2. Project overview. You can mainlty discuss process selection and preliminary design information. For process selection, you can consult the literature, for preliminary design information, you can copy the data I gave you and supplement some of your local weather condition or other relvant parameters etc. 3.landfill site selection. Based on the local topographic and geological conditiogns and relevant technical specifications, you need to give some suggestion. This part will involve the calculation of garbage capacity. 4. Foundaition and anti-seepage of landfill. You need to design according to the design specifications. 5. Production and collection of leachate. This part involves the calculation of the production of landfill leachate. According to the calculation results, we need to describe the treatment process of landfill leachate. 6. Landfill gas collection, drainage and utilization. This part involves the calculation of the production of Landfill gas. Other content can be described or arranged according to technical specifications. 8. Sealing field engineering. You can extract and describe according to technical specifications.